led tv backlight tester

-
a very usefull circuit for every tv technician. this device provides the various voltages we need to test backlight led arrays or single led's.





Comments

Post a Comment

Popular posts from this blog

low battery indicator circuit

-
Image
this is a very usefull circuit if you're building projects powered by batteries.this simple circuit informs you when the battery needs to be recharged by turning on a led.the threshold is set to the desired voltage by a multiturn potentiometer. the only thing you should have in mind is that it doesnt work with red led's,at least with the ones i tryied. i think it has something to do with the very low voltage that red led's need to lit.didnt have the time to experiment further.besides that,the circuit works perfect. components needed: R1= 1k (2,2k if you use smd led) R2= 2.2K U2= TL431 adjustable shunt regulator(can be found very easy in power supplies) PR1=10K potentiometer (for higher precision use multiturn)  LED1= led (not red-didnt work with me) here is a video building it.
Read more

ADJUSTABLE TEMPERATURE SOLDERING STATION

-
Image
this is the first test video i uploaded to my new youtube channel so please forgive the poor quality of the video. in the next videos im making i will provide a more detailed presentation and HD video of this project. if you don't wanna miss it please subscribe . ------------------------------------------------------------------------------------------------------------ this is an adjustable temperature soldering station using arduino uno or pro mini to sense the temperature and control the soldering iron. this circuit-project is used many months now in my workshop.i built 4 of them and gave one as a gift to a friend and all of them work flawlessly. the solder iron used is a cheap hakko clone which uses a type k thermocouple for temperature sensing. notice that i didnt use the L7809 regulator shown in the schematics because it was geting too warm.instead i used a buck converter for the 9 volt output for the lm358 and then a L7805 regulator  to power the arduino.you can a
Read more